Witte Parels - Wit White AB (regenboog) | Colortone

White Pearls - White

Name: White Pearls - White
Brand: Colortone
SKU: 6096500488480
Price: 7.99 EUR
Availability: InStock

€7,99 EUR

Are you looking for pearls to upgrade your designs? We have exactly what you need! Whether you're going for subtle looks or daring combinations with other gems, our Off-White pearls are the perfect choice. And guess what? Our pearls are super easy to apply thanks to the flat back. Sizes range from 2.0mm to 6mm, and there are approximately 3500 flatbacks in the box. Doesn't that sound fantastic? Let's get creative!

This box contains the following sizes: 2.0mm / 2.5mm / 3mm / 4mm / 5mm / 6mm.

Do you prefer white pearls with a rainbow glow? Then look at our White AB Pearls !

Title:

White

White White AB (regenboog)

Variant

Quantity:

How do you use these pearls?

Step 1 : Finish your design or manicure as normal. Apply a thin layer of top coat over the entire nail and cure.

Step 2 : Apply a layer of Gel UV Glue on the spot where you want to apply the pearls. This can be done, for example, with a liner brush or a dotting tool. Do not harden it yet.

Tip! Do not apply the gel too thinly. If you use the right amount, the pearls are already well encapsulated when applied in the uncured Gel UV Glue.

Step 3 : Use a Wax Tool Picker to pick up the pearl and place it in the layer of Gel UV Glue. Cure this layer completely in the lamp (LED 90 sec; UV 180 sec).

Step 4 : The most important thing is that the pearls are encapsulated on the sides to make your design 'impact proof'. If they are not yet sufficiently encapsulated after application in step 3: use a liner brush and apply a layer of Gel UV Glue around the pearls. Cure completely in the lamp (LED 90 sec; UV 180 sec). In principle, it is not necessary to seal the Gel UV Glue with a top coat. To keep the pearls beautiful for as long as possible, we recommend sealing them with a thin layer of top coat.

Colortone White Pearls - White

€7,99 EUR

Instructions

How to use these pearls:

Step 1

First, prep your manicure and create your design as you normally would. Then, apply a thin layer of top coat over the entire nail and cure it.

Step 2

Apply a layer of Gel UV Glue to the area where you want to place the pearls. You can use a liner brush or a dotting tool for this. Do not cure it yet.

Tip

Do not apply the gel too thinly. Using the right amount ensures the pearls are well encapsulated when placed into the uncured Gel UV Glue.

Step 3

Use a tool, such as a Wax Tool Picker, to pick up the pearl(s) and place them onto the layer of Gel UV Glue. Cure this layer fully in the lamp (LED 90 sec; UV 180 sec).

Step 4

The most important thing is that the pearls are encapsulated on the sides to make your design ‘impact-proof.’
If they are not sufficiently encapsulated after step 3, use a liner brush to apply a thin layer of Gel UV Glue around the pearls. Cure this layer fully in the lamp (LED 90 sec; UV 180 sec). It is not strictly necessary to seal the Gel UV Glue with a topcoat, but to keep the pearls looking their best for as long as possible, we recommend sealing them with a thin layer of topcoat as the final step.

White Pearls - White

Instructions

You may also like

SUBSCRIBE TO THE NEWSLETTER &
GET 10% OFF YOUR FIRST PURCHASE

White Pearls - White

Instructions

You may also like

SUBSCRIBE TO THE NEWSLETTER & GET 10% OFF YOUR FIRST PURCHASE

SUBSCRIBE TO THE NEWSLETTER &
GET 10% OFF YOUR FIRST PURCHASE