Flat backs Silver

How to use these flat backs:

1. Complete your design or manicure as usual. Apply a thin layer of top coat over the entire nail and cure it.
   
   
2. Apply a layer of Gel UV Glue to the spot where you want to place the stud. You can use a liner brush or a dotting tool for this. Do not cure yet. Tip: Don't apply the gel too thinly. If you use the correct amount, the studs will already be well encapsulated when you apply them to the uncured Gel UV Glue.
   
   
3. Use a Wax Tool Picker to pick up the stud and place it in the layer of Gel UV Glue. Cure this layer completely in the lamp (LED 90 sec; UV 180 sec).
   
   
4. It's important that the studs are encapsulated on the sides to make your design "bump-proof". If they are not sufficiently encapsulated after step 3: use a liner brush and apply a layer of Gel UV Glue around the studs. Cure this completely in the lamp (LED 90 sec; UV 180 sec). It is generally not necessary to seal the Gel UV Glue with a top coat. To keep the studs looking beautiful for as long as possible, we recommend sealing them with a thin layer of top coat as a final step.